Chord Buddy

Learn to play guitar instantly

Guitar Setup: Make Your Acoustic Guitar Easier To Play

Sore fingers from playing guitar is an important subject because for many beginners when they start practicing regularly, like you should, their fingers get sore. This is particularly an issue on the steel-string acoustic guitar, not so much of an issue on the nylon string or electric guitar, because of the different kinds of strings they use. Just to be clear I am talking about the fingers of the left hand. The left hand is the hand with the fingers you press down into the strings, and the middle strings will cut into your fingers, and they will make your fingers sore.
Now, there are several things you can do about this which I will go over, and you can explore which option works best for you.
Changing the strings is one way to help the pain is to put lighter strings on your guitar. I would recommend starting off by putting extra-light acoustic guitar strings on your acoustic guitar. They are thinner, but they still sound good. Another option is to put electric guitar strings on your guitar. They don’t sound as good, but you can put thinner strings on that way, and of course, you can always build up to thicker strings.
Another possibility is a type of string called “silk and steel”. This string is a hybrid-type of string that is in-between a steel string and a nylon string, and it goes on the acoustic guitar. It has a softer sound and a softer feel. Some people don’t like the sound, and it might not be the overall sound-solution for you, but it is a good stepping stone to get to the thicker strings on the acoustic guitar.
Another guitar setup possibility is to adjust the action of your guitar. What I mean by adjusting the action is that you are going to adjust the height of the strings so they are closer to the frets on the neck of the guitar. This will make it easier for you to push the strings down. Now there are several steps in adjusting the action of a guitar, and it involves making the nut of the guitar lower, the bridge of the guitar lower, and the neck just the right angle.
Another guitar setup option is to file down the frets so they are more even. The trick is to get the strings as low as possible without buzzing anywhere up and down the neck. You want to be able to press the note and have it sound nice and clear, and to not hit one of the frets higher up. This is tricky, and I recommend getting a competent guitar repairman to do a complete guitar setup.
If you are mechanically inclined and have a reasonable tolerance for risk, you can learn how to do it. Check out videos on YouTube that I have seen. The risk involved is that if you file the nut too low or the bridge, you are going to have to go out and get a new one. You can actually over-tighten that metal truss rod in the neck of the guitar to the point you even break the neck on your guitar. This is a really tricky option that I would not recommend.
The last resort is to play your guitar with sore fingers until they get tough. Now they will actually get tough. It usually takes about three or four weeks, and some people can just work through it. The trick is to find that place where if it is holding you back from practicing, do what you need to do to get easier strings on the guitar. If you can keep practicing and wait until they get tough, then go for it. There is nothing wrong with that, and once you get calluses on your fingers, or thicker skin rather, you really won’t have to worry about that much anymore in the future as long as you keep playing. If you stop playing for a while you might have to go through that process of building calluses again.
In summary:
• Change The Strings
•Lighter Strings – Extra Light
•Electric Guitar Strings
•Silk & Steel

• Adjust The Action
•Lower Bridge Saddle
•Lower Nut
•Even Out Frets
•Adjust Truss Rod

• Options for Adjusting The Guitar
•Competent Repair Person (best)
•Learn Yourself
•YouTube Videos


Leave a Reply

You must be logged in to post a comment.